3D Systems iPro 8000 SLA Center User Manual page 57

8000/9000
User's Manual
Recoater
The manual Recoater allows you to operate the recoater manually. The following pages show the
command's functions.
FORWARD/BACK: Moves the Recoater forward/back by placing the cursor
intended direction and pressing and holding the left mouse button
recoater placement is achieved, or until the recoater reaches a direction limit.
57
To Move the Recoater forward or back,
specify Distance and Velocity.
Position: Shows the current position of the elevator relative to the home
position
The following buttons perform the actions to alter the position.
Stop: Stops all motion during the move.
www.3dsystems.com
M a n u a l O p e r a t i o n s
until the intended
over the
40-D043 Revision C 5-May-17