Table of Contents
Advertisement
USER MAINTENANCE
6
Described here are the servicing and preventive maintenance procedures that are required in the day to day operation of
the ProX® DMP 200 printer. The following safety rules are applicable for all procedures.
Caution : the machine is not allowed to run a job during a maintenance .
Caution : perform only tasks you are authorized and certified to complete.
Caution : presence of metal powder. Do not use or manipulate any material without first reading the
safety datasheet (SDS) for that specific material.
Caution : Personal Protective Equipment (PPE) must be used to protect the user against health or safety
risks during working tasks . Wear disposable rubber gloves (and leather gloves when using a vacuum
cleaner), anti-static coverall, anti-static safety shoes and safety glass . Wear disposable dust mask rated
FFP3 or N99 level protection at minimum ; we recommend the use of powered air-purifying respirator .
WARNING : FINE METAL DUST IS HIGHLY FLAMMABLE . AVOID USING ANY IGNITION SOURCE NEAR THE
MACHINE (OPEN FLAME, SPARKING, ELEVATED TEMPERATURE PARTS) .
SERVICING : REPLACEMENT PROCESS FILTERS PROCEDURE
ITEM
External Filter vessel
3D SYSTEMS, INC.
1500
SPECIFICATION
HOURS
Replace
71
X
Advertisement
Table of Contents
