3D Systems iPro 8000 SLA Center User Manual page 71

8000/9000
User's Manual
Options
71
Options enables you to select or deselect the machine options for the
build. Checking the boxes selects the following options:
Skip Init: Skips the initial operations of the build, including coarse resin
leveling and proper elevator positioning.
Recoating: Recoats during the build.
Profiling: Profiles beam and determines drawing speed during the
build.
Drawing: Draws, or solidifies, the polymer to create the part during the
build.
Drift: Performs the drift correction during the Drawing (see previous
entry).
Leveling: Checks and resets, if necessary, the resin level to the
appropriate build level.
Sensor Log: Writes the sensor information into a file.
Build Log: Writes the build information into a file.
Abort Build On Profiled Beam Width Error:
the beam width measurement is not within system specifications.
DP: Enables you to display and to change the current value of the
resin's penetration depth.
EC: Enables you to display and to change the current value of the
resin's critical exposure.
www.3dsystems.com
M a c h i n e W i n d o w
Allows the build to abort if
40-D043 Revision C 5-May-17