Phantom Extension Number Assignment - Panasonic KX-TD816CE Installation Manual

130

Phantom Extension Number Assignment

Description
Selection
Default
Programming
Conditions
Feature References
38
4.3 System Programming
Assigns the phantom numbers. Each number will be assigned to a
flexible CO or DSS button and used as a Phantom button.
• Location number: 001 through 128
• Phantom number: 2 through 4 digits
All locations – Not stored
1. Enter 130.
Display: Phantom NO.
2. Press NEXT.
Display: Location NO?→
3. Enter a location number.
To enter location number 001, you can also press NEXT.
Display example: 001: Not Stored
4. Enter a phantom number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another location, press NEXT or PREV, or
SELECT and the desired location number.
7. Repeat steps 4 through 6.
8. Press END.
• There is a maximum of 128 phantom numbers. Each number has two to
four digits, consisting of numbers 0 through 9.
• The first one or two digits of the phantom extension numbers are
subject to program [100] "Flexible Numbering, (01) through (16) 1st
through 16th hundred extension blocks."
• Phantom extension numbers and other extension numbers should be
unique. Double entry and incompatible entry for these numbers are
invalid. Valid entry examples are: 10 and 11, 10 and 110; Invalid entry
examples are: 10 and 106, 210 and 21.
In order not to make an invalid entry, check the other extension
numbers in programs [003] "Extension Number Set," [012] "ISDN
Extension Number Set, [118] "Voice Mail Extension Number
Assignment" and [813] "Floating Number Assignment."
Section 3, Features — in this manual
Phantom Extension