Tubular Mount Chopper Reel Installation (Option) - Landoll 2130 Operator's Manual

REAR BAR OF FRAME
OR WING ASSEMBLY
CHOPPER REEL ARM
ASSEMBLY
REEL/GANG
BAR ASSEMBLY
ar and rsb chopper reel assy op

3-16 TUBULAR MOUNT CHOPPER REEL INSTALLATION (OPTION)

3-16.1 Slide chopper reel arm assemblies over
rear frame bar using chopper reel placement
drawings (See Figures 2-17, 2-18, 2-19, and
3-22).
3-16.2 Bolt in place using top and bottom sup-
port plates, 3/4-10 x 12 hex head cap
screws, and hex lock nuts.
Figure 3-22 Tubular Mount Chopper Reel Installation (Option)
3-16.3 Attach reel/gang bar assemblies to
chopper reel arm assemblies using place-
ment drawings (See Figures 2-17, 2-18,
2-19, and 3-22).
3-16.4 Bolt in place using gang bar mount
plate, 5/8-11 x 5 hex head cap screws, and
hex lock nuts.
3/4-10 X 12 HEX
HEAD CAP
SCREW
SUPPORT
PLATE
SUPPORT
PLATE
3/4-10 HEX
LOCK NUT
5/8-11 HEX
LOCK NUT
GANG BAR
MOUNT PLATE
5/8-11 X 5 HEX
HEAD CAP
SCREW
3-31