Offset Shank Mount Installation (Option) - Landoll 2130 Operator's Manual

3-13 OFFSET SHANK MOUNT INSTALLATION (OPTION)

3/4-10 HEX LOCK NUT
12" OFFSET MOUNT
REAR FRAME
WELDMENT TUBE
U-BOLT
offset mount op
Figure 3-18 Offset Shank Mount Installation
If back row of shanks continually plug with res-
idue, offset shank mounts are available for the
back row of shanks. Contact the Landoll Corpora-
tion Service department for more information.
3-13.1 If offset shank mounts are used, bolt to
the rear frame using u-bolts, and 3/4-10 hex
lock nuts (See Figure 3-18).
3-27