Ie Remote Surveillance Via Lan & Wan; Lan - Vitek Transcendent VT-TTR Series Manual

Transcendent DVR Series
Serial No: The MAC address of the HD TVI Hybrid DVR (Go to Main
MenuInformationNetwork to check the MAC address of the HD TVI Hybrid DVR).
User Name: The login username of HD TVI Hybrid DVR. The default username is admin.
Password: The login password of HD TVI Hybrid DVR. The default password is 123456.
14.2 IE Remote Surveillance via LAN & WAN
In order to view the HD TVI Hybrid DVR from a network it must be connected to a
LAN/WAN. The network setup should be done accordingly.
① Go to the HD TVI Hybrid DVR's Main Menu
address, Subnet Mask, etc. If using DHCP, please enable DHCP in both the HD TVI
Hybrid DVR and the router.
② Enter Record Setup to set network video parameters like resolution, frame rate
etc.
③ Open IE on a computer on the same network. Input the IP address of the HD TVI
Hybrid DVR in IE address bar and press enter.
④ IE will download ActiveX component automatically. Enter the username and
password in the subsequent window (the default username is admin; the default
password is 123456).
Notice: If HTTP port is not 80, add the port number after IP address. For example, set
HTTP port as 82, input IP address like 192.168.0.25:82.
There are two ways for the HD TVI Hybrid DVR to connect to internet.
① Go to Main MenuSetupNetwork interface to input IP address, Subnet Mask, etc.
1. Connect the device to internet through router or virtual server.
If using DHCP, please enable DHCP in both the HD TVI Hybrid DVR and router.
② Forward IP address and port number in Virtual Server setup of the router or virtual
server. Configure the firewall to allow accessing the HD TVI Hybrid DVR. (If you
have enabled the UPnP function in both the HD TVI Hybrid DVR and router, you can
skip this step.)
③ If users want to utilize dynamic domain name, please apply for a domain name in a
DNS server supported by the HD TVI Hybrid DVR or router. Then add to the HD TVI
Hybrid DVR or router.
This unit supports www.meibu.com, www.dyndns.com, www.no-ip.com and mintDNS
type.
④ Open IE browser, input IP address, or dynamic domain name and enter. If HTTP
port is not 80, add the port number after IP address or domain name.
⑤ IE will download ActiveX automatically. Then a window pops up and asks for user
Setup Network tab to input IP
 
53