Sequence View; Mask View - Vitek Transcendent VT-TTR Series Manual

You can view channel or channel group in sequence.

4.3 Sequence View

① Go to Main MenuSetupLiveMain Monitor interface.
② Select display mode and channel.
③ Select dwell time. Click
picture. Click
④ Click "Apply" to save the setting.
⑤ Return to the live view interface. Right click to show the menu toolbar. Then enable
Dwell button.
If there is something you don't want to display in the live image. You can set mask. For a
given channel a maximum of three areas can be masked.

4.4 Mask View

① Go to Main MenuSetupLiveMask interface.
To set up mask area:
② Click "Setting" button to go to live image.
button to set up the previous channel groups of dwell
button to set the latter channel groups of dwell picture.
Transcendent DVR Series
16