name and password. Input name and password correctly, and enter to view.
Note: If you cannot download and install ActiveX, please refer to FAQ Q8.
①
Go to Main MenuSetupNetwork interface to enable PPPoE and then input user
2. Connect the device to internet directly.
name and password received from your ISP. Next, click "Apply". The HD TVI Hybrid
DVR will connect to the server and will give a confirmation message.
②
When accessing the remote interface of the HD TVI Hybrid DVR, user can input
WAN IP to access directly (user can go to Main MenuInformationNetwork
interface to check IP address). The browser will download Active X control.
③
The following setting steps are as the same as ④ and ⑤ in Point 1.
①
After starting Apple computer, click Apple icon. The following window will pop up.
14.3 Remote Surveillance through Apple PC
Please select "System Preferences" "Internet &Wireless" "Network".
②
Go to Network interface and then click "Ethernet Connected" to check the internet
connection of Apple PC.
③
After acquiring the IP address, Subnet Mask and so on, please go to Main
MenuSetupNetwork interface to manually input IP address, Subnet Mask and
Gateway according to the configuration of PC. The network segment should be the
same as the PC. If using DHCP, please enable DHCP in the HD TVI Hybrid DVR and
Transcendent DVR Series
54