Clip Backup; Alarm - Vitek Transcendent VT-TTR Series Manual

Transcendent DVR Series
④ In the backup information interface, you can check the relevant information of
backup files, such as, storage type, save file type, etc. Then click "Start" button to
start backup.
Note: If the backup files are saved in DVR format, please check backup player. Only
this player can play these files in DVR format. If the backup files are saved in AVI
format, you can play these files with common media player.
You can cut the recording file and do a backup in the playback interface. The setting steps

8.2 Clip Backup

of clip backup are as below:
① Insert USB storage device into the DVR.
② In the playback mode, click
again to set the end time.
③ Click
Select the storage type and save file type. Then click "Start" button to start backup.
9
Alarm settings include sensor alarm, motion alarm, video loss alarm, and alarm out

Alarm

button to see a backup window as shown in the above-mentioned figure.
button to set the start time. Then click this button
31