Vitek Transcendent VT-TTR Series Manual page 58

Transcendent DVR Series
Please connect speed dome to the device via RS485 first, make sure the protocol of the
speed dome is supported by the device and set the relative parameters manually. User
can control the dome up, down, right, left or stop rotating on Control Center, adjust
rotation speed, Iris and zoom, focus on the dome, and set the presets, etc.
Buttons
Click the right mouse on the live interface. This will take you to a pull-down menu.
Stream: This device supports master stream and sub stream. Master stream has higher
frame rate, max 25FPS (PAL)/30 FPS (NTSC) for every channel, but it needs higher
network bandwidth. Sub stream has low frame rate, max 6FPS (PAL)/7FPS(NTSC)for
Rotate the dome upwards.
up-left. rotate the dome diagonally up-right
dome downwards
rotate the dome diagonally down-right
towards left rotate the dome towards right
the dome.
Drag the scroll bar to adjust rotation speed of the dome.
'Iris' button. Click
dome. Click button near 'Iris' button to close iris of the dome.
'Zoom' button. Click
picture of camera. Click
the picture of camera.
'Focus' button. Click
Click button near 'Focus' button to focus near.
Go to the Preset
Select and do auto cruise
Track
Auto scan
Wiper button
Light button
57
Rotate the dome diagonally
Description
rotate the dome diagonally down-left
button near 'Iris' button to open iris of the
button near 'Zoom' button to zoom in the
button near 'Zoom' button to zoom out
button near 'Focus' button to focus far.
rotate the
rotate the dome
stop rotating