Sensor Alarm - Vitek Transcendent VT-TTR Series Manual

setting.

9.1 Sensor Alarm

configure sensor based alarm:
Some models may not support this function
① Go to Main MenuSetupAlarmSensorBasic tab.
② Enable channels by checking the checkboxes beside the desired channels.
③ Set the alarm type according to triggered alarm type. Two options: NO and NC.
④ Click "Apply" button to save the setting.
⑤ Go to Alarm Handling tab. Select hold time.
⑥ Click "Setting" button to pop up a dialog box as shown below.
Transcendent DVR Series
. Operate the following steps to
32