Motion Based Recording - Vitek Transcendent VT-TTR Series Manual

Transcendent DVR Series
② Select channel and click
button to delete the selected schedule.
If you want to apply the schedule setting of a certain channel to other or all channels, you
need to select channel and click "Copy" button.
You can also set week schedule by double clicking in the grid area. This will take you to a
dialog box as below.
① Select a day and click "Add" button to schedule start time and end time. Then click
to save.
② Select other days and add schedule or copy settings from one schedule to the others
under the Apply Settings To item.
Motion based recording means that the camera will be triggered to record when there is

6.4 Motion Based Recording

a motion event detected. The setting steps are as follows.
① Go to Main MenuSetupScheduleMotion tab. Choose channel to set schedule for
motion based recording. The setting steps are similar to normal schedule recording
(See Chapter 6.3 Schedule Recording for details).
② Go to Main MenuSetupAlarmMotion interface. Enable motion alarm and set
the motion detection area (See Chapter 9.2 Motion Alarm for details).
button to add a certain day schedule. Click
23