View Information; Shutdown; Upgrade - Vitek Transcendent VT-TTR Series Manual

Transcendent DVR Series
After you go to Disk ManagementAdvanced tab, you can check model, S/N, firmware,
health status of the disk in this interface. You also can monitor the temperature, internal
circuit, dielectric material of the disk, analysis the potential problems of the disk and
warn so as to protect its data.
Go to Main MenuInformation interface as shown below. In this interface, you may

13.3 View Information

check the information of system, event, log, network, online users, record and QRCODE.
Click "System" to check the hardware version, MCU version, kernel version, device ID, etc.
Click "Event" to search for events like motion, sensor and video loss. The utility provides
an interface to have a date based and a channel based search. This report can further be
saved on a USB flash drive as an html file using the export button.
Click "Log" to search for relevant logs as per set date and event which include Operation,
Setup, Playback, Backup, Search, Check Information and Error. This report can further be
saved on a USB flash drive as an html file using the export button.
Click "Network" to check relevant parameters of network.
Click "Online Users" to check the details of the connected online users.
Click "Record" to check resolution, fps and record status including sensor alarm
recording, motion recording, manual recording or schedule recording.
Click "QRCODE" to check the QRCODE. You can quickly access the mobile client by
scanning QRCODE.
Click Main MenuShutdown to pop up a system shutdown window. Click "OK" to

13.4 Shutdown

confirm shutdown.
At present,

13.5 Upgrade

http://vitekcctv.com/Downloads.asp
The setting steps are as follows:
① Copy the upgrade software into a USB storage device.
② Connect the USB flash drive to the USB port.
it only supports USB update.
when there is a new software version.
51
Get the software from