Playback By Picture Search - Vitek Transcendent VT-TTR Series Manual

Transcendent DVR Series
① Go to Main MenuSetupAlarmMotion. Enable motion alarm and then set the
 Taking Snapshots on Motion Alarm
motion detection area (see Chapter 9.2 Motion Alarm for details).
② Go to alarm handling setting by click "Setting" button under Trigger. Then checkmark
the snapshot channel and click "OK" button to confirm the settings.
③ Set schedule for motion alarm. The setting steps are similar to normal schedule
recording (See Chapter 6.3 Schedule Recording for details).
④ Click "Apply" to save the settings. The picture will be automatically captured once a
motion alarm happens.
 Taking Snapshots on Sensor Alarm
① Go to Main MenuSetupAlarmSensor. Enable sensor alarm and choose the
Some models may not support this function.
sensor type.
② Go to Alarm Handling tab. Then click "Setting" button under Trigger. An alarm trigger
box will pop up. Then select the snapshot channel and click "OK" button to confirm
the settings.
③ Set schedule for sensor alarm. The setting steps are similar to normal schedule
recording (See Chapter 6.3 Schedule Recording for details).
④ Click "Apply" to save the settings. The picture will be automatically captured once a
sensor alarm happens.
① Go to Main Menu
② Select data and channels on the right hand side.
③ Press "Search" button to search for a recorded image.
④ Once an alarm image has been identified, the user can double click the image to
play recording.
Search Image tab.
 
29