Network Settings; Network - Vitek Transcendent VT-TTR Series Manual

① In the Advanced interface, click track "Setting" button to see a dialog box as below.
② Control the dome by rotating up, up left, down, right down, left, left down, right and
up right and adjust the rotate speed and the value of zoom, focus and iris of the
dome.
③ Click Start Record button to record the track of PTZ. Click it again to stop record.
④ Click Start track button to play recorded track. Click this button again to stop
playing.
⑤ Click
11
Network Settings includes six submenus: network, sub stream, Email, server, NAT and

Network Settings

other settings. Network settings must be configured if the device is used for monitoring
over network.

11.1 Network

① Go to Main MenuSetupNetworkNetwork tab.
To set up network:
icon to exit the current interface. Then click "Apply" to save the setting.
Transcendent DVR Series
40