Other Settings; Basic Configuration; System; Dst - Vitek Transcendent VT-TTR Series Manual

Transcendent DVR Series
① Go to Main MenuSetupNetworkOther Settings, checkmark DDNS, select
Application

"dvrdydns" at the DDNS Sever pull down list box and input user name and
password.
② Map the server port and IP address in the router (if the user enables UPnP function,
he can skip this step). Click Save button to save the setting.
③ Login
"http://www.xxx.dvrdydns.com", connect to the IE client.
12

Other Settings

Basic configuration includes three sub menus: system, date & time and DST.

12.1 Basic Configuration

① Go to Main MenuSetupBasicSystem interface.
② In this interface you can set up the device name, device ID, video format, max
network users, VGA resolution, language and so on. The definitions for every
parameters display are as below:
Device Name: The name of the device. It may display on the client end or CMS that help
user to recognize the device remotely.
Device ID: This ID is used to map the device with IR remote controller and speed dome
cameras.
Video Format: Two modes: PAL and NTSC. User can select the video format according to
that of camera.
Password Check: If this option is enabled, the user would need to input the user name
and the password for performing corresponding operations.
IE browser and input
45
registered domain name