Transcendent DVR Series
Note: PTZ must support wiper and light button and these two buttons are only
available when selecting PELCO-P or PELCO-D.
⑤
Click Save button to save the setting. Click
to view this bar again. Click
⑥
Return to the Advanced-Preset Setting interface and click OK button to save the
setting.
①
In the Advanced interface, click cruise Setting button to see a window as shown
To set up cruise:
below.
②
Click Add button to add cruise line in the list box (8 cruise lines can be added at
most).
③
Select a cruise line and click Setup button to see a dialog box as below.
④
Click Add icon
and then click Delete icon
modify the setting of a preset point. User can click
adjust the position of preset point. Click Preview button to preview the cruise line.
Click OK button to save the setting.
To set up track (Pattern):
icon to exit the current interface.
to set the speed and time of preset point. Select a preset point
to delete that preset point. Click Modify icon
39
icon to hide the tool bar. Right click
to
those icons to