Video Loss Alarm; Other Alarm - Vitek Transcendent VT-TTR Series Manual

Transcendent DVR Series
icon to clear the existing field and set fresh.
⑥ Select "All" to set the same settings for all channels.
⑦ Click "Apply" button to save the setting.
⑧ Go to Schedule tab. The setting steps for schedule motion based alarm are similar to
normal schedule setup (see Chapter 6.3 Schedule Recording for more details).
This DVR can be set up to detect video loss. The setting steps are as follows:

9.3 Video Loss Alarm

① Go to Main MenuSetupAlarmVideo Loss.
② The setup steps for video loss trigger are similar to "Alarm Handling" (See Sensor
Alarm Handling setting for more details).
This tab gives a choice to configure alarm for Disk Full, IP Conflict, and Disconnect event,

9.4 Other Alarm

Disk Attenuation or Disk Lost.
① Go to Main MenuSetupAlarmOther Alarm.
② Use the dropdown menu and select the event or the alarm.
③ Check the required trigger options.
If the selected event is "Disk Full", then use the drop down box for "Disk Shortage
Alarm" to choose a threshold value for remaining HDD space. If the threshold value
is reached, the system will trigger the Disk Full Alarm.
35