T.z - Vitek Transcendent VT-TTR Series Manual

Transcendent DVR Series
Choose alarm out and click "Alarm" button to trigger alarm manually. Click "Clear" button
to clear the alarm.
10
Before you can control the speed dome, please make sure the speed dome is connected to
P.T.Z
the DVR. P.T.Z configuration includes two submenus: serial port and advanced.
Serial port settings are as follows:
① Go to Main MenuSetupP.T.ZSerial Port interface.
② Select "Enable" and set up the address, baud rate and protocol according to the
settings of the speed dome.
③ Select "All" to set the same settings for all channels.
【Address】: The address of the PTZ device.
【Baud rate】: Baud rate of the PTZ device. Range form: 110, 300, 600, 1200, 2400, 4800,
9600, 19200, 34800, 57600, 115200, 230400, 460800, 921600.
【Protocol】: Communication protocol of the PTZ device. Range from: NULL, PELCOP,
PELCOD, LILIN, MINKING, NEON, STAR, VIDO, DSCP, VISCA, SAMSUNG, RM110, HY,
N-control.
【Simulative Cruise】: If enabled, no matter whether the PTZ device supports cruise or
not, the presets will cruise.
Advanced settings include preset setting, cruise (TOUR) setting and track setting.
Go to Main MenuSetupP.T.ZAdvanced.
37