Remote Control Description - Vitek VT-EHL Series Instruction Manual

VT-EHL Series
Remote Control
Remote Control

3. Remote Control description.

※ If there are many DVRs on a stack, each DVR must be set with a different ID. You can do this here: Menu/System
Setup/Main/System/Control Device. From the remote controller sync the remote to each DVR, then all DVRs can be
controlled with one remote controller.
How to sync a remote controller to a DVR's ID
Press the ID button on the remote. Notice REMOTE ID statement on the screen.
On the remote controller, enter the System ID number, press ENTER, then press RETURN.
(default System ID is 0)
13