Remote Surveillance; Ie Remote Surveillance By Nat; Nat Settings; Nat Access - Vitek Transcendent VT-TTR Series Manual

③ Go to Main MenuUpgrade tab. You will see the upgrade software name displaying
in the upgrade list box.
④ Select that software and then click Upgrade button. The system will be upgraded
automatically.
14

Remote Surveillance

In order to access the device remotely over LAN/WAN, the network should be set up

14.1 IE Remote Surveillance by NAT

accordingly.
① The HD TVI Hybrid DVR shall be powered on and connected to the network.
② Go to Main MenuSetupNetworkNetwork. You can obtain the IP address,
Subnet Mask and Gateway automatically. You can also manually input them
according to the actual network situation.
③ Set the preferred or alternative DNS Server (Please refer to 5.6.1 Network for
details).
④ Go to Main MenuSetupNetworkNAT tab.
⑤ Enable NAT and input the NAT Server (The default NAT Server is
⑥ Click "Apply" to save the parameters (Please refer to NAT for details).
www.autonat.com).
After finishing the NAT settings, you can enter the NAT Server on the PC. (Input
network will download the ActiveX automatically.
http://www.autonat.com
Note: If you cannot download and install ActiveX, please refer to FAQ Q8.
After installing ActiveX successfully, it will pop up a login box:
to go to the IE client.) First time accessing the NAT, the
52
Transcendent DVR Series