③ Go to alarm handling setting by click "Setting" button under Trigger. Then go to "To
Record" tab. You can select the recording channel and click "OK" button to confirm
the settings.
④ Set schedule for motion alarm. The setting steps are similar to normal schedule
recording (See Chapter 6.3 Schedule Recording for details).
Note: The timelines of these two schedules (schedule for motion based recording
and schedule for motion alarm) must match.
6.5 Sensor Based Recording
*Some models may not support this function.
① Set schedule for sensor based recording. Go to:
MainMenuSetupScheduleSensor. Select channel and then set the schedule.
The settings steps of schedule for sensor based recording are similar to normal
schedule recording (See Chapter 6.3
② Go to Main MenuSetupAlarmSensor to see the following figure. Enable sensor
alarm and choose the sensor type.
Schedule Recording
24
Transcendent DVR Series
for details).