Transcendent VT-TR5HA DVR Series
12.1
Mobile Client Surveillance
Enable NAT in the DVR. Refer to 11.1.7 NAT Configuration for details.
Download and install the mobile client "Transcendent DVR Viewer" into the mobile
device for Android or iOS system.
Run the mobile client, go to the "Add Device" interface and then click
QRCode of the DVR (Go to StartàSettingsàSystemàInformationàBasic to view the
QRCode of the DVR).
After scanning the QRCode successfully, input the login password to log in mobile client.
12.2
Web LAN Access
Click StartàSettingsàNetworkàTCP/IP to go to the "TCP/IP" interface. Set the IP
address, subnet mask, gateway, preferred DNS and alternate DNS of the DVR.
Open IE browser on a computer, input the IP address of the DVR in the IE address bar and
then press enter to go to the login interface as shown below. You can change the display
language on the top right corner of the login interface. Input the username and password of the
DVR in the interface and then click "Login" to go to the live preview interface.
12 Remote Surveillance
97
to scan the