Alarm Out; Manual Alarm - Vitek Transcendent VT-TTR Series Manual

④ Click "Apply" to save the setting.

9.5 Alarm Out

Some models may not support this function
① Go to Main MenuSetupAlarmAlarm Out.
To set up alarm out:
② Input relay name and select hold time.
③ Go to Schedule tab. The setting steps for schedule for alarm out are similar to
normal schedule setup (see Chapter 6.3 Schedule Recording for details).
① Go to Main MenuSetupAlarmAlarm OutBuzzer.
To set up buzzer:
② Checkmark Buzzer and set buzzer alarm hold time. This would trigger the buzzer
when the system is in alarm.
Note: The alarm out and buzzer must be enabled and their schedules must cover the
schedule of other alarm types, like sensor/motion alarm, so that the triggered alarm
out and buzzer can take effect on an alarm.

9.6 Manual Alarm

shown below.
Some models may not support this function
Transcendent DVR Series
.
. Go to Main MenuManual Alarm as
36