Timing Recording; Motion Based Recording; Sensor Based Recording; Intelligence Recording - Vitek TRANSCENDENT VT-TR5HA Series Manual

Record & Disk Management
7.4.2

Timing Recording

Timing Recording: the system will record automatically according to the schedule.
Set the timing record schedule of each camera. See 7.3 Schedule Setting for details.
7.4.3

Motion Based Recording

Motion Based Recording: the system will start motion based recording when motion object
appears in the setup schedule. The setup steps are as follows:
Set the motion based recording schedule of each camera. See 7.3 Schedule Setting for
details.
Enable the motion and set the motion area of each camera. See 9.2.1 Motion
Configuration for details.
The camera will start motion based recording once you finish the above settings.
7.4.4

Sensor Based Recording

Set the sensor based recording schedule of each camera. See 7.3 Schedule Setting for
details.
Set the NO/NC type of the sensor, enable the sensor alarm and then check and configure
the "Record". See 9.1 Sensor Alarm for details.
7.4.5

Intelligence Recording

Set the intelligence recording schedule of each IP camera. See 7.3 Schedule Setting for
details.
Enable the intelligence detection (object detection, exception, line crossing or intrusion
detection) and draw alert surface or warning area of each IP camera. See 9.3 Intelligence
Alarm for details.
The camera will start intelligence recording once you finish the above settings. This function
is only available for some IPCs.

7.5 Disk Management

Click StartàSettingsàDiskàDisk Management to go to disk management interface. You can
view the DVR's disk number and disk status and so on in the interface. Click the "Formatting"
button to format the HDD.
Note: 1. A new HDD should be formatted for normal use.
2. For normal use of the HDD which has been used in other DVR, if the DVR is of the same model
with the new DVR, please import the configuration file of the DVR to the new DVR or format the
HDD; if the models of the two DVRs are different, please format the HDD.
54
DVR User Manual