Record Mode; Manual Recording; Timing Recording; Motion Based Recording - Vitek VT-TR5HA1620 Manual

Go to "Edit Schedules" interface and then click
Schedule" are similar to that of the "Add Schedule". Click
7.4

Record Mode

7.4.1

Manual Recording

Method One: Click
recording of the cameras.
Method Two: Go to live preview interface and then click the right-click menu "Manually
Record On" in the camera window or click
start recording.
Note: Click Start à Settings à Record à Mode Settings and then set the manual record time in the
interface. Click "Apply" to save the settings.
7.4.2

Timing Recording

Timing Recording: the system will record automatically according to the schedule.
Set the timing record schedule of each camera. See 7.3 Schedule Setting for details.
7.4.3

Motion Based Recording

Motion Based Recording: the system will start motion based recording when motion is
detected during the motion schedule. The setup steps are as follows:
Set the motion based recording schedule of each camera. See 7.3 Schedule Setting for
details.
Enable the motion and set the motion area of each camera. See 9.2.1 Motion Configuration
for details.
The camera will start motion based recording once you finish the above settings.
7.4.4

Sensor Based Recording

Set the sensor based recording schedule of each camera. See 7.3 Schedule Setting for
details.
Set the NO/NC type of the sensor, enable the sensor alarm and then check and configure
the "Record". See 9.1 Sensor Alarm for details.
7.4.5

Intelligence Recording

Set the intelligence recording schedule of each IP camera. See 7.3 Schedule Setting for
details.
Enable the intelligence detection (object detection, exception, line crossing or intrusion
detection) and draw alert surface or warning area of each IP camera. See 9.3 Intelligence
Alarm for details.
The camera will start intelligence recording once you finish the above settings. This function
is only available for some IPCs.
on the tool bar at the bottom of the live preview interface to enable
54
Transcendent VT-TR5HA DVR Series
to edit the schedule. The settings of "Edit
to delete the schedule.
on the tool bar under the camera window to