9.4.
Step 4: IPCCTVDNS.COM
When VITEK Server is used in a Dynamic IP environment, it is required to utilize IP-CCTV DNS
feature. Refer to Section 36 IP-CCTV DNS Setup on page 141 to see how to set up.
9.5.
Step 5: Recording Configuration
Vitek cameras with MicroSD card can be configured for recording options in this section. Refer to
Section 17.2 Recording Configuration with microSD card on page 71 to see how to set up
9.6.
Finish
After clicking Finish all changes will be saved automatically to the camera/server
10. System Configuration Menu
When you click on System Configuration item on Admin Menu, the following sub menu will be
displayed.
10.1.
Server Name Setup
Click Step 1 on Quick Configuration or Server Name under System Configuration then the
following will be displayed and you will find out the system information such as model number of
the VITEK camera, server name (camera name), MAC address (serial number), firmware version,
and Web image version.
ENVI Series: VT-IPSN16M
38