Schedule Setting; Motion Recording - Vitek VT-SRE Spire Elite User Manual

Schedule Setting

1.
Select a day of the week <DAy> to configure the
recording schedule.
2.
Click a time cell from which you want to make the
schedule and drag it to a desired cell. For example, to
schedule recording between 8am and 5pm, click the
cell in the "08" column (for the desired camera) and
drag it to the cell in the "17" column.
Or use the [▲▼◀▶] buttons on the remote control to
move to the cell and press [EnTER]. Then, use the
[▲▼◀▶] buttons to move to a desired cell and press
[EnTER] again.
3.
When the time selection is complete, you will
be prompted with three options: On (enables the recording), OFF (disables the recording), CAnCEL (cancels any
changes).
4.
To apply the change, click <APPLy> in the bottom of the screen.
5.
When done, press the [ExiT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
\ \

Motion Recording

you can configure the settings of: motion recording time,
recording size, frame rate per second and quality
1.
From the <MEnU> - <RECORDing> menu, select
<MOTiOn RECORDing>.
2.
Use the [▲▼◀▶] buttons on the remote control or use
the mouse to select either <SiZE/FPS/QUALiTy> or
<SCHEDULE>.
3.
Set each item of <RESOLUTiOn>, <FPS>, <QUALiTy>
and use of the <AUDiO> for the motion recording.
For more information, see the "Continuous Recording".

(page 61)
4.
To apply the change, click <APPLy> in the bottom of the screen.
5.
When done, press the [ExiT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
93