Adding Xt Telepresence In Equinox Management - Avaya Scopia XT Telepresence Deployment Manual

20. Select Next.
21. Select Done.
Your XT Telepresence is configured and calibrated. The Calibration application closes and
the standard screensaver image is displayed .
Related links
Configuring the XT Telepresence

Adding XT Telepresence in Equinox Management

About this task
If you use regular endpoints to create XT Telepresence, define them in Avaya Equinox Management
as components of the telepresence system, not as single endpoints. You cannot directly change an
existing single endpoint in Avaya Equinox Management into a telepresence endpoint, and vice
versa.
If your organization uses an LDAP directory, only the primary endpoint should be defined in the
LDAP directory.
January 2017
Figure 66: Reconnecting the monitor cables.
on page 34
®
Avaya Scopia XT Telepresence Deployment Guide
Comments on this document? infodev@avaya.com
Adding XT Telepresence in Equinox Management
79