Logic DLC NET Series Use And Maintenance Manual page 71

USE AND MAINTENANCE MANUAL – DLC
6.4.4 End of recipe
( )
6.4.5 Recipe printing (
LOGIC S.r.l. - M0145Db.docx
Mod. L0006A01 of 30/05/2016
NET
Series

The instrument makes auto-tare automatically, showing the net weight
value on the display. The
progress the dosage of a manual component. The
indicating that there is a recipe in progress.

The operator introduces manually quantity and net weight is increased.

When the dosage is finished, the operator has two options:
o
Dose an additional manual component: to do this you must
press the button
completed is stored automatically. The display will show
the index of the following manual component for two seconds and
then the value of the net weight after the auto-tare. The operator
can proceed with a further dose by repeating the procedure.
o
Confirm and exit: when the sequence of manual components is
complete, instead of pressing the
show

After the dosage of one or more manual components, the
steady on, indicating that the last dosage of manual components has been
successfully.
If a recipe is in progress, you can end it at any time with
operation assigns the end time recipe.
Once done the
you want. Starting from the next dosage, the system will clear the print memory of
the components dosed previously.
After the ending of the recipe through
first dosage of the next recipe.
To end a recipe, must be a recipe in progress (active
procedure:

From the weight display menu, press

The first menu item is

Press to confirm and finish the recipe, but press

If confirmed, the instrument will show the written
led and the procedure is finished.
)
The command allows you to print the recipe as specified in paragraph 6.2.5
( active or not).
To command a print:
led is blinking on, indicating that it is in
to make auto-tare. The manual dosing just
and returns automatically to the main menu.
, you can print the last recipe executed as many times as
, the termination of the recipe command.
Use as a batcher
led is blinking on,
button, the display will
command. This
, remember to print before the
led flashing) follow this
to enter the top-level menu
to cancel.
, turns off the
Page 71 of 78
with
led is