Logic DLC NET Series Use And Maintenance Manual page 27

USE AND MAINTENANCE MANUAL – DLC
Table 9. Serial port parameters for communication with BEKA
Parameter
Transmission
Baud rate
Word
Stop bit
Parity
LOGIC S.r.l. - M0145Db.docx
Mod. L0006A01 of 30/05/2016
NET
Series
Below are listed the serial configuration parameters for communication with
NET
DLC . The parameters, also shown in Figure 17, are to be set on BA488C to
have a correct communication:
Value
Asynchronous
19200
8 bits
1
None
Set up the KeyPad parameter to "Internal" to use the integrated buttons of
BEKA.
®
BA488C
Installation
Page 27 of 78