Logic DLC NET Series Use And Maintenance Manual page 65

USE AND MAINTENANCE MANUAL – DLC
6.2.4 Configuration of the
expected amount in
flight time (
LOGIC S.r.l. - M0145Db.docx
Mod. L0006A01 of 30/05/2016
NET
Series

Scroll through the button

Press

Press

The display will show the value currently set (default

To change it use the button

Press

At this point the instrument will show the letters
is finished.
Use the auto-correction of flight only in case where the line pressure is
constant. In the presence of high error, immediately turn off the auto-
correction.
)
The parameter gives the time in seconds that the instrument waits after
closing the automatic dosing valve before acquiring the data weight for printing.
In other words, when the valve closes (when it was reached a net weight equal to
the setpoint minus the in flight amount), the instrument considers the data stable
after seconds.
For an accurate reporting, choose this parameter in sufficiently large way to
be sure that the acquired data is true and not flow more product on the scale
after the set time.
The instrument accepts the following amount of waiting time in flight values:
2, 5, 15, 30 and 60 s.
To set the parameter

Enter the

Scroll through the button

Press

Scroll through the button

Press

Press

The display will show the value currently set (default ).
until the menu
to enter.
at any time to cancel and return to the previous menu.
to choose
to confirm.
:
menu as described in paragraph 5.3.2.
until the menu
to enter.
until the menu
to enter.
at any time to cancel and return to the previous menu.
Use as a batcher
.
).
or
and the procedure
.
Page 65 of 78