Logic DLC NET Series Use And Maintenance Manual page 56

USE AND MAINTENANCE MANUAL – DLC
®
5.5.8 Profibus-DP address
configuration
( )
5.5.9 Real-time clock
configuration
( )
LOGIC S.r.l. - M0145Db.docx
Mod. L0006A01 of 30/05/2016
NET
Series
It is possible set the Profibus-DP
the section.
Instrument also supports auto baud-rate up to 12 Mbit/s. It's possible set values for
the address to Profibus-DP
and 2 are reserved for the PLC communication system.
To change the Profibus-DP

Enter the

Scroll through the button

Press to enter.

Press at any time to cancel and return to the previous menu.

The display shows the message with the value currently set (default ).

To change it use the button

Press to confirm.

At this point the instrument will show the letters
is finished.
On the -EB expansion board there is a real-time clock for clock-calendar storage
for printing.
To chance and update the real-time clock follow this procedure:

From the main weight display screen, press the button
top-level menu.

Use the button
.

Press to enter the menu.

The display will show
minutes.

The display will show the current time with the first digit flashing. Use the
buttons
next one.

Once editing is complete press

The display will show
day.
®
address through the appropriate menu item in
®
between 0 and 127. It' possible that the stations 0, 1
®
address:
menu as described in paragraph 5.3.2.
until the
until the desired item is not displayed.
to scroll through the menu items to the section
. Press
to increase the digit and
to confirm hours and minutes.
. Press
Use as interface with indicator
menu.
and the procedure
to enter the
to start to editing hours and
to move on to editing the
to start editing the month and
Page 56 of 78