Logic DLC NET Series Use And Maintenance Manual page 55

USE AND MAINTENANCE MANUAL – DLC
5.5.6 Configuration of the
instrument identifier
( )
5.5.7 Minimum increase
configuration
( )
LOGIC S.r.l. - M0145Db.docx
Mod. L0006A01 of 30/05/2016
NET
Series
The parameter is an identification number of the instrument that is used
to discern the different weighing stations in the printing.
To change the

Enter the

Scroll through the button

Press to enter.

Press at any time to cancel and return to the previous menu.

The display shows the message with the value currently set (default ).

To change it use the button

Press to confirm.

At this point the instrument will show the letters
is finished.
The parameter is the minimum increase in engineering units which is
used to change the weight on the display.
To change the

Enter the

Scroll through the button

Press to enter.

Press at any time to cancel and return to the previous menu.

The display shows the message with the value currently set (default ).

To change it use the button

Press to confirm.

At this point the instrument will show the letters
is finished.
parameter:
menu as described in paragraph 5.3.2.
until the
until the desired item is not displayed.
parameter:
menu as described in paragraph 5.3.2.
until the
until the desired item is not displayed.
Use as interface with indicator
menu.
and the procedure
menu.
and the procedure
Page 55 of 78