USE AND MAINTENANCE MANUAL – DLC
Table 26. Setpoint intervention mode
Menu
/
/
/
/
/
/
/
/
5.6.2
Setpoint operating
value (
LOGIC S.r.l. - M0145Db.docx
Mod. L0006A01 of 30/05/2016
NET
Series
Move through the menu by pressing the button
menu and press
The options are selectable in sequence by pressing the button
change the operation mode of the single set point and
and move to the next.
The options are the following:
Meaning
set point 1, work on the gross weight, high alarm (
set point 1, work on the net weight, high alarm (
set point 2, work on the gross weight, high alarm (
set point 2, work on the net weight, high alarm (
set point 3, work on the gross weight, high alarm (
set point 3, work on the net weight, high alarm (
set point 4, work on the gross weight, high alarm (
set point 4, work on the net weight, high alarm (
When you arrive on the fourth set point and pressing
are saved
)
To select the value of the setpoint operation follow these steps:
Press the button
Move through the menu by pressing the button
menu and press
Using
(
flashing
Press
Press
to enter the menu.
to access the top-level configuration menu.
to enter the menu.
you can select the set point that you want to edit the value
...
), press
to increase the digit and
to confirm.
Use as interface with indicator
until the
) or low (
) or low (
)
) or low (
) or low (
)
) or low (
) or low (
)
) or low (
) or low (
)
until the
to start editing. The first digit will start
to move to the next.
to
to confirm
)
)
)
)
the editations
Page 58 of 78
Need help?
Do you have a question about the DLC NET Series and is the answer not in the manual?