USE AND MAINTENANCE MANUAL – DLC
5.3.3
Net / gross weight
displaying
LOGIC S.r.l. - M0145Db.docx
Mod. L0006A01 of 30/05/2016
NET
Series
: to perform a zero calibration
: to configure the instrument
: to perform the calibration operations
: for the real-time set clock (only with expansion board -EB)
: for the setpoint set (only with expansion board -EB)
When the desired menu is selected, press the button
For the
menu you must press simultaneously
Press
at any time to cancel and return to the weight display screen.
On the main screen, the system shown the actual weight value.
By pressing the button
weight and vice versa. Function mode is indicated by the status led
.
If you push the button
weight display.
you can switch the display from gross weight to net
you can make the temporary tare zeroing of the net
Use as interface with indicator
to confirm and enter.
and
.
and
Page 46 of 78
Need help?
Do you have a question about the DLC NET Series and is the answer not in the manual?