USE AND MAINTENANCE MANUAL – DLC
6.2 Batcher configuration (
6.2.1
Scale zero
configuration
(
)
LOGIC S.r.l. - M0145Db.docx
Mod. L0006A01 of 30/05/2016
NET
Series
At this point the instrument also closes the valve. If the in flight amount
(
) is set correctly, when the valve closed a quantity of product exactly
as the set point (
The instrument will wait for a time in seconds equal to the one set in
parameter to capture the value of the data weight for printing.
In the case where the algorithm of auto-correction of the amount in flight is active,
the
value will be corrected automatically by the system in function of the
error committed at each dosage. For details see section 0.
)
The
parameter allows you to set a minimum gross weight value to be
set to start the dosage. In other words before starting a dosing the scale must
score a gross weight equal to least the amount set in
This parameter can be used as protection in case of absence of the tank / tin
before dosing.
To set the zero scale:
Enter the
Scroll through the button
Press
to enter.
Scroll through the button
Press
to enter.
Press
at any time to cancel and return to the previous menu.
The display will show the value currently set (default , no control).
To change it use the button
move on to editing the next one.
Press
to confirm.
At this point the instrument will show the letters
is finished.
If the
parameter is set to 0, zero scale control is not performed and
the dosages start even if the indication of gross weight is negative. In that
case of operator error the valves and pumps could be inadvertently
commanded and it may cause of spills of product.
) will flow.
menu as described in paragraph 5.3.2.
until the menu
until the menu
to increase the digit and
Use as a batcher
parameter.
.
.
to
and the procedure
Page 63 of 78
Need help?
Do you have a question about the DLC NET Series and is the answer not in the manual?