Logic DLC NET Series Use And Maintenance Manual page 52

USE AND MAINTENANCE MANUAL – DLC
LOGIC S.r.l. - M0145Db.docx
Mod. L0006A01 of 30/05/2016
NET
Series

Use the buttons
editing to the next. Edit this value of divisions so that the multimeter
indicates 4mA in the case of

Press to confirm. The display shows the message
instrument waits for the value of the DAC divisions corresponding to
20mA.

Press to start editing, edit the value using the buttons
until the multimeter does not indicate 20mA (default:
Press to confirm.

The last parameter to edit is if the analogue output must follow the trend of
the net or gross weight. The display shows the message corresponding to
the current set (default
or

At this point the instrument will show the written
procedure is finished.
and to add the flashing digit and move to
setting or 0 mA if
). Use the button
. Press to confirm.
Use as interface with indicator
.
, as the
and
to select
and the
Page 52 of 78
).