The "User Management" Menu Item - Siemens SIMATIC RF600 Series Configuration Manual

Configuring with the WBM
7.3 The menu items of the WBM
7.3.14

The "User management" menu item

To be able to work with the user management function you first need to enable it. To do this,
click the "Enable user management" button and confirm with "OK". The user management
requires a secure connection using HTTPS. Change the connection and log in with an
administrator login.
Figure 7-23
Note
First login to WBM via HTTPS
The readers are delivered with the following user profile pre-installed at the factory:
• User name: admin
• Password: admin
Using the "admin" user profile, you can create new user profiles and delete existing profiles.
NOTICE
Security recommendation: Enable user management
After starting the WBM the first time, no user management is enabled. To make sure that
no unauthorized persons can access the reader settings, we recommend that you enable
the user management and create new user profiles after the first login and delete the
preinstalled profile.
98
The "User management" menu item; "User management on / off"
Configuration Manual, 11/2018, C79000-G8976-C386-07
SIMATIC RF600