Siemens SIMATIC RF600 Series Configuration Manual page 62

Configuring with the WBM
7.3 The menu items of the WBM
The content of the tag fields is output only via the tag events (Page 215) of the XML
commands.
Table 7- 7
Icon
You will find more information on the tag fields in the section "The "Settings - Tag fields"
menu item (Page 63)".
Filters
In the "Filters" area, you can assign filters to the read point. The data required for the
comparison with the filter criteria is read out after reliable identification of a transponder.
Depending on the filter evaluation (criterion applies / does not apply), identified transponders
are either filtered out or not.
Table 7- 8
Icon
You will find more information on filters in the section "The "Settings - Filters" menu item
(Page 66)".
62
Description of functions
Description
Assign tag field
Click the button to assign existing tag fields to the read point. You can select the re-
quired tag field from the drop-down list.
Create new tag field
Click the button to create new tag fields. The button acts as a link to the "Settings -
Tag fields" menu item.
Delete tag field
Click the button to remove tag fields already assigned to the read point.
Edit tag field
Click the button to edit existing tag fields. The button acts as a link to the "Settings -
Tag fields" menu item.
Description of functions
Description
Assign filter
Click the button to assign existing filters fields to the read point. You can select the
required filter from the drop-down list.
Create new filter
Click the button to create new filters. The button acts as a link to the "Settings - Fil-
ters" menu item.
Remove filters
Click the button to remove filters already assigned to the read point.
Edit filters
Click the button to edit existing filters. The button acts as a link to the "Settings - Fil-
ters" menu item.
Configuration Manual, 11/2018, C79000-G8976-C386-07
SIMATIC RF600