Siemens SIMATIC RF600 Series Configuration Manual page 194

Programming via XML interface
10.3 XML commands
Parameter
value_bank
value_
startAddress
value_dataLength
value_password
value_data
value_success
value_utcTime
value_
antennaName
value_rSSI
value_channel
194
Type Values
-- 0...3
Decimal value 0...65535
0...9
Decimal value 1...1024
0...9
Hexadecimal 00000000...
value FFFFFFFF
0...9, A...F
Hexadecimal --
value
0...9, A...F
Fixed values True
False
Time --
Fixed values Antenna01
Antenna02
Antenna03
Antenna04
Decimal value 0...255
0...9
Decimal value 1...50
0...9
Description
Memory bank of the transponder
0: Reserved
•
1: EPC
•
2: TID
•
3: USER MEMORY
•
Start address of the first byte in the
memory bank where writing will start.
Number of bytes to be written.
The reader checks the correct length of
"value_data".
If the check is negative, a negative
reply is sent.
Optional
Access password for the transponder
This parameter does not need to be
defined if there is no password protec-
tion activated for the transponder.
Data that should be written. Each byte
is represented by two hexadecimal
characters.
Example:
The byte sequence "0x12, 0x34, 0xA3"
is represented as the character string
"1234A3" in the "value_data" parame-
ter.
"value_dataLength" is 3 in this exam-
ple.
Flag to indicate whether or not the
command was successful for this tran-
sponder.
True: Command successful
•
False: Command unsuccessful
•
Optional
UTC time stamp (Universal Time Co-
ordinated) in ISO 8601 format:
yyyy-MM-ddTHH:mm:ss.fffzzz
e.g.: 2009-12-24T18:34:56.929+00:00.
Optional
Name of the antenna
Optional
RSSI value
Optional
Channel number on which the tran-
sponder was detected.
Configuration Manual, 11/2018, C79000-G8976-C386-07
SIMATIC RF600