Siemens SIMATIC RF600 Series Configuration Manual page 218

Programming via XML interface
10.4 XML EventReports
Parameter
value_event
value_utcTime
value_
antennaName
value_rSSI
rSSIMin
rSSIMax
value_channel
value_power
value_polarization
value_inventoried
218
Type Values
Fixed values New
Glimpsed
Observed
Lost
Time --
Fixed values Antenna01
Antenna02
Antenna03
Antenna04
Decimal value 0...255
0...9
Decimal value 0...255
0...9
Decimal value 0...255
0...9
Decimal value 1...50
0...9
Decimal value 0, 5.00...33.00
0...9
Fixed values Circular
Vertical
Horizontal
Unknown
Decimal value 0...65535
0...9
Description
The transponder events are also gen-
erated by a smoothing algorithm in the
read point. The algorithms are speci-
fied in the WBM.
A report can also contain more than
one event for the same transponder.
Each individual event has its own tran-
sponder structure.
If a report contains two events for the
same transponder, two transponder
structures exist with the same "val-
ue_tagID" but different values for "val-
ue_event".
UTC time stamp (Universal Time Co-
ordinated) in ISO 8601 format:
yyyy-MM-ddTHH:mm:ss.fffzzz
e.g.: 2009-12-24T18:34:56.929+00:00.
Name of the antenna
RSSI value
The lowest RSSI value with which the
transponder was detected. This is a
value without a unit and without direct
reference to the power strength.
The highest RSSI value with which the
transponder was detected. This is a
value without a unit and without direct
reference to the power strength.
Optional
Channel number on which the tran-
sponder was detected.
Optional
Used radiated power of the antenna in
[dB]
Increment: 0.25 dB
Polarization of the antenna.
With external antennas always un-
known.
Optional
Indicates how often the transponder
was identified via the air interface be-
fore it changed to the "Observed" sta-
tus.
Configuration Manual, 11/2018, C79000-G8976-C386-07
SIMATIC RF600