Settime - Siemens SIMATIC RF600 Series Configuration Manual

name
RssiDelta
Modula-
tionScheme
10.3.2.9

setTime

This command sets the internal reader clock.
Command
<frame>
<cmd>
</cmd>
</frame>
Reply
<frame>
<reply>
</reply>
</frame>
The error codes for negative replies ("resultCode" ≠ 0) are described in the section "Negative
XML replies (Page 213)".
SIMATIC RF600
Configuration Manual, 11/2018, C79000-G8976-C386-07
value
0...255
32, 33, 34, 35,
37, 65
<id> value_id </id>
<setTime>
<utcTime> value_utcTime </utcTime>
</setTime>
<id> value_id </id>
<resultCode> 0 </resultCode>
<setTime/>
objType objName
Source See descrip-
tion
General General
Programming via XML interface
10.3 XML commands
Description
Difference for RSSI values
Maximum difference compared
with the RSSI value of the tran-
sponder with the highest RSSI
value that the transponders can
have and still be processed.
This is a value without a unit
and without direct reference to
the power strength.
"objName" must have the name
of the corresponding read point.
Modulation scheme of the read
point
This also specifies which tran-
sponder types are identified
(ISO 18000-62/-63).
161