Service and maintenance
13.2 Error messages
13.1.6
Diagnostics using Studio 5000 Logix Designer
This section is intended only for users of Rockwell controllers (RF680R/RF685R).
You will find information on diagnostics using the Studio 5000 Logix Designer in the Studio
5000 Logix Designer manual.
13.2
Error messages
You have the following options for error analysis of the modules:
● Via the LED status display of the reader
for all RF600 readers
● Via XML error messages
for all RF600 readers
You will find more information on XML error messages in the section "Interrupts
(Page 223)".
● Via OPC UA error messages
for all RF600 readers
● using the WBM
for all RF600 readers
These alternative methods are described below.
13.2.1
How the LED status display works
246
Configuration Manual, 11/2018, C79000-G8976-C386-07
SIMATIC RF600