Gettime - Siemens SIMATIC RF600 Series Configuration Manual

Programming via XML interface
10.3 XML commands
Parameter
Parameter
value_id
value_utcTime
10.3.2.10

getTime

This command requests the current time stamp of the internal reader clock.
Command
<frame>
<cmd>
</cmd>
</frame>
Reply
<frame>
<reply>
</reply>
</frame>
The error codes for negative replies ("resultCode" ≠ 0) are described in the section "Negative
XML replies (Page 213)".
162
Type
Decimal value
0...9
Time
<id> value_id </id>
<getTime/>
<id> value_id </id>
<resultCode> 0 </resultCode>
<getTime>
<returnValue>
<utcTime> value_utcTime </utcTime>
</returnValue>
</getTime>
Values Description
0...4294967295 Unique command identifier
-- UTC time stamp (Universal Time Co-
ordinated) in ISO 8601 format:
yyyy-MM-ddTHH:mm:ss.fffzzz
e.g.: 2009-12-24T18:34:56.929+00:00.
Note: The reader only accepts time
information from 01.01.2000 ...
18.01.2038.
Configuration Manual, 11/2018, C79000-G8976-C386-07
SIMATIC RF600