Setio - Siemens SIMATIC RF600 Series Configuration Manual

Parameter
Parameter
value_id
value_utcTime
10.3.2.11

setIO

This command sets the digital outputs of the reader.
The general settings for the response of the outputs such as "Inactivity" or "Reset time"
specified using the WBM in a base configuration (see also section "The "Settings - Digital
outputs" menu item (Page 69)").
Command
<frame>
<cmd>
</cmd>
</frame>
Reply
<frame>
<reply>
</reply>
</frame>
The error codes for negative replies ("resultCode" ≠ 0) are described in the section "Negative
XML replies (Page 213)".
SIMATIC RF600
Configuration Manual, 11/2018, C79000-G8976-C386-07
Type
Decimal value
0...9
Time
<id> value_id </id>
<setIO>
<outValue> value_outValue </outValue>
</setIO>
<id> value_id </id>
<resultCode> 0 </resultCode>
<setIO/>
Values Description
0...4294967295 Unique command identifier
-- UTC time stamp (Universal Time Co-
ordinated) in ISO 8601 format:
yyyy-MM-ddTHH:mm:ss.fffzzz
e.g.: 2009-12-24T18:34:56.929+00:00.
Programming via XML interface
10.3 XML commands
163