Reset_Rf68Xr - Siemens SIMATIC RF600 Series Configuration Manual

Programming via Rockwell controller
9.5 Programming add-on instructions
9.5.1.2

Reset_RF68xR

With the aid of the "Reset_RF68xR" block, you can reset the RF680R and RF685R readers.
The reader is reset to the settings configured on the reader with the WBM. The
"Reset_RF68xR" block does not have any device-specific parameters and is executed using
the "EXECUTE" parameter.
With the "Reset_RF68xR" block, you can interrupt any active Ident block at any time. The
blocks are then ended with "DONE = true" and "ERROR = false".
Figure 9-3
114
"Reset_RF68xR" block
Configuration Manual, 11/2018, C79000-G8976-C386-07
SIMATIC RF600