Menu items
User management
System
Help
If you are logged in to the WBM with the "User" role, some menu items can only be used
with restrictions. You will find a list of the restrictions in the section "The "User management"
menu item (Page 98)".
Main window
The main window shows the contents of the selected menu items. Here, you can configure
the various menu-dependent parameters.
Note
Entering values in text boxes
Apart from manual entry of values, you can also change values with the following buttons:
• Arrow up / down
The value is increased or decreased by one increment.
• PgUp / PgDn
The value is increased or decreased by ten increments.
• Home / End
The value is set to the minimum or maximum value.
Message area
The message area displays all WBM-related error messages and warnings (e.g. transfer
errors). The message is displayed here are entered automatically in the "Settings -
Messages" menu item.
Information bar
The information bar displays deviations between the settings in the user interface of the
WBM and the configuration stored on the connected reader. Minor deviations are shown on
an orange background; changes that require the reader to be restarted are shown on a red
background.
SIMATIC RF600
Configuration Manual, 11/2018, C79000-G8976-C386-07
Functions
Enabling/disabling user management
•
Creating and deleting user profiles
•
Changing passwords
•
Updating the firmware
•
Resetting readers to the factory settings
•
Specifying the IP address
•
Importing certificates
•
Transferring PLC device description files
•
Documentation relevant for the reader
•
Configuring with the WBM
7.2 The WBM
45