Table of Contents
Advertisement
Configuring with the WBM
7.3 The menu items of the WBM
Parameter
Length
Data
ASCII
Initialize data
Next to the list of tag fields, the data of the selected memory area is displayed (decimal or
hexadecimal and in ASCII).
With the "Read" button, the data is read from the transponder. The data read from the
transponder is highlighted in red to distinguish it from the data entered manually. If no
values are displayed, this means that no values have yet been read from the transponder.
Click the "Write" button to transfer the changed data to the transponder.
NOTICE
Read/write transponder data
To enable transponder data to be read/written via the WBM, the reader must have been
correctly initialized beforehand. Depending on the transponder/card types used, the reader
may need to be configured using the Config Editor first. You can find information on this in the
configuration manual "SIMATIC RF1000".
7.3.9
The "User management" menu item
In the "User management" menu item, you can enable/disable authentication, create, delete and
edit user profiles and change passwords.
This page is divided into the following areas:
• User profiles
• User properties
• Password
• Roles
• Auto logoff
• Authentication
• Security settings
54
Description
Input box for entering the length within the selected
tag field and starting from the start address within which you want to read,
change or write the data of the target transponder. You can use the button
to change the input/output format (decimal or hexadecimal).
Range of values: 1 ... 1024 bytes
Input/output boxes for the values (decimal or hexadecimal).
Possible characters: 0 ... 9, A ... F
In the ASCII field, the data is shown additionally in ASCII notation. You can
edit the data both in the data field and in the ASCII field.
Button for initializing the data.
Using the initialization function, you can preset the data fields.
Operating Instructions, 08/2023, C79000-G8976-C698-02
SIMATIC RF1100
Advertisement
Table of Contents
